The NOTUS series heat recovery units offer high thermal insulation with next-generation EPP bodies, up to 90% thermal efficiency, advanced control options with WiFi and mobile application, and easy installation thanks to its lightweight structure.
The NOTUS HV model offers air flow up to 375m3/h, ans combining vertical/horizontal and right/left type devices into a single unit with interchangeable air ducts. Our units are plug-and-play, equipped with G4 filters, automatic bypass damper, temperature and humidity sensors as standard. Additional sensors and functional features can be added with optional expansion modules.
High efficiency heat exchange system with EC Fans
High efficiency hexagonal counter flow plastic plate heat exchangers offer up to 90% thermal efficiency. Our fans are self-motorized with energy saving EC motors and operate quietly. The metal casing is double walled, with 25mm insulation material in-between to ensure both high thermal performance and low noise levels.
Free-Cooling
On seasonal transitions (spring and autumn) when indoor and outdoor temperature differences are not significant, BSK Heat Recovery Units automatically switch to Free Cooling mode by opening the built-in bypass vent. The air will pass through this canal without going through the heat exchanger, so you can cool your house directly.
Humidity Control
Built-in humidity sensor can automatically set your BSK Heat Recovery Unit to Boost mode when a set level of humidity is reached in your house to quickly dissipate the moisture to prevent it building up.
Defrost mode
We suggest that you equip a pre-heater for uses below 0 C to avoid freezing inside the unit, however to prevent this from happening when there is no heater attached, our devices automatically enter defrost mode when temperature requirements are not met. Defrost mode adjusts intake and exhaust air rates to prevent icing and keep the device temperature at a safe level. We strongly advise you to use a pre-heater for climate conditions below -10 C.
ModBus Compatible
Our units use ModBus protocol to connect and communicate with your building management system and report malfunctions or periodic maintenances. You can monitor and control your device through a computer or a central system.
| Max. Flow (@100Pa) | 375 m3/h |
| Thermal Eff. | up to 90% |
| Supply Voltage | 230 VAC, 50 Hz |
| Max Power | 150W |
| Dimensions | 550 x 500 x 800 mm |
| Spigot diameter | 125/160 mm |
| Weight | 19kg |
| Sound Pres. (1m) | 50 dB(A) |
BSK Connect Mobile Application
Standart Wi-Fi on all of our devices will let you use BSK Connect mobile application to monitor and control your units from your smart phone or tablet.
4" Touch Control Panel
With the optional touch control panel, you can control all of the advanced features of your unit from your wall.
BSK Cloud Centralized Control Tool
BSK Cloud offers centralized control monitoring and service of multiple units from a single web tool suitable for corporate housings and building managers.
F7 Pollen Filter
Our standard G4 filters offers good protection against dust and common particles, however you may need additional protection from pollens and other smaller particles especially if residents are allergic. We suggest the F7 grade pollen filters for such individuals.
Pre-heater
For subzero outside conditions, you should equip an electrical pre-heater to prevent ice forming inside the unit. This electrical pre-heater can connect to your BSK Heat Recovery Unit’s fresh air intake vent.
Water heater
If your house is already heated by hot water, you can equip duct type water coils to the supply air vent to further heat the incoming air for a precise control of temperature. For buildings without the option for a water heater, we also offer electrical heaters.
Silencer
We designed BSK Heat Recovery Units to be as quiet as possible; however you may need to further reduce the noise levels in some situations. You can add the duct type silencer or the flexible silencer for those tight spaces, to the supply vent and enjoy the silence.
Drainage siphon
Condensation inside the BSK Heat Recovery Unit is kept at a minimum but varying humidity and temperature levels may increase the precipitation. With this apparatus you can connect your unit to your existing water system and get rid of the water droplets hassle free.
CO2 Sensor
CO2 sensor allows automatic control for ventilation rate in crowded venues or houses with fireplaces. When the CO2 levels rise, your BSK Heat Recovery Unit increases ventilation rate to supply you with the best air quality.
